1: Remove the existing split pin by bending the pins straight using a pair of pliers, remove the split pin.

2: Remove the centre pin. (save for later)

3: Remove the old footrest and spring. (save spring for later)

4: Clean any dirt from the exposed frame.

5: Re-insert the original centre pin through the frame / footpeg / spring / footpeg / frame.

6: Support the footpeg and re-insert the original split pin through the hole in the centre pin.

7: Ensure the spring is correctly positioned as above.

8: Bend the tails of the split pin back over to secure your new titanium footpeg. (repeat for other side)

Now Stand back and admire your new Raptor Racing Titanium footpegs!

Designed to be Super wide with no support bracing required.

RAPTOR RACING = Quality, Strength and Style!